Action Inletting
 

please contact me for the price and further

options for your stock

 

Please Note: Stocks for highlighted Actions require approximately 16  weeks to produce
in any Sporter or Target Style stock, and a £20.00 setup charge applies for special set up.

Browning: A-Bolt Long / Short / Super Short (WSSM) Right & Left Hand

Browning:  FN, BBR Long, BBR Short

BRNO: 600, 601, 602, CZ 550 (please state caliber), CZ 452, CZ 527

BSA Monarch Short, Monarch Long


Enfield: British P-14 (Straightened Guard), US P-17, Eddystone 1917, Winchester 1917, Remington 30'S, P-14 & 1917 (Deep Belly Guard--original military)








Howa: 1500 Long & Short  
Barrel Channel Options: Standard Factory Barrel & Factory Varmint Barrel

Husqvarna: HVA Commercial, Swedish

Interarms: Mark X

Interarms: Mini Mark X

 

Kimber:    Model 84

 

Marlin: Model 882 & 982 (all variations), 25MN, 17V, 917V

Mauser 98 Military - Long Action - Large Ring (7-13/16" Between Lug Holes, 1-3/8" Front Receiver Ring) Cut standard for an original military long floorplate, and original stepped military barrel.  A #1 or #3 contour barrel channel also available on request at no charge. 
98, 98 Large Ring, 98 German, M98 Persian, 1909 Argentine, 1909 Peruvian, 1910 Costa Rican, Czech VZ24-BRNO, 1924 Yugoslav (***1924 Yugo was made both Long 7-13/16 & Short 7-5/8"***), 1935 Peruvian, 1903 Turkish, 1908 Brazilian, 1938 Turkish 8MM

Mauser 98 Commercial - Long Action - Large  Ring (7-13/16" Between Lug Holes, 1-3/8" Front Receiver Ring) Cut standard for a commercial short floorplate, and a factory #1 barrel contour.  A #3 contour barrel channel also available on request at no charge.  Browning FN, Centurion, Husqvarna FN, Santa Barbara, Sako Magnum FN, Interarms Mark X, Musketeer, FN, FN 400

Mauser 98 Military - Long Action - Small  Ring (7-13/16" Between Lug Holes, 1-1/4" Front Receiver Ring) Cut standard for a short floorplate, small ring, and a small 1/2" barrel channel. 
98 Small Ring, G33/40 Small Ring, 98 Carbine Small Ring

Mauser 48 Military - Short Action - Large Ring (7-5/8" Between Lug Holes, 1-3/8" Front Receiver Ring) Cut standard for an original stepped military barrel.  A #1 or #3 contour barrel channel also available on request at no charge. 
M48 Yugoslavian, M48A Yugoslavian, VZ500, M47, M52C, M24 Yugoslav (***1924 Yugo was made both Long 7-13/16 & Short 7-5/8"***)

Mauser 93,94,95,96 Series Short Action- Small Ring (7-5/8" Between Lug Holes, 1-1/4" Front Receiver Ring) Cut standard for an original stepped military barrel.  A #1 or #3 contour barrel channel also available on request at no charge.
M93 Spanish, M94 Swedish, M95 Mexican, M95 Chilean, M96 Swedish, 98 Mexican Short, 1910, 1916, 1938

Mauser 1891 Argentine  

Siamese Mauser

Mauser 2000 / 3000

And ALL Other Mausers Available

Montana:    1999 Long & Short, (Right & Left Hand)  Barrel Channel Options (Factory Contours): Ultralite Sporter #1 Contour, Lightweight Sporter  #2 Contour, Regular Sporter #3 Contour, Medium Sporter #4 Contour, Heavy Sporter #5 Contour, Light Target #6 Contour,  Medium Target #7 Contour, & Heavy Target #8 Contour.

Mosin Nagant: M91, M30, M44, M38



Remington: Model 700ADL Long & Short (Right & Left Hand), Model 700BDL Long & Short (Right & Left Hand),  40X (Right & Left Hand--For Swept Bolt Version)   Single Shot variations are available for all models.
Barrel Channel Options: "Mountain Rifle" Light Weight Barrel Contour, Standard Factory Barrel, Light Varmint Barrel & Heavy Varmint Barrel. 

Remington: Model 7, 597, M30'S, M37,  M541, M581, M600 & M660 (approx. 8 weeks delivery), M722, M721, M725, M788 Short & Long  


Ruger: 77/17, 77/22, 77/22 Mag, 77/22 Hornet, 77/50 In-Line Muzzleloader

Ruger: 77 Old with Tang Safety - Long & Short (Right & Left Hand), Model 77 MK II (side safety) Long & Short
Ruger 10/22 & 10/22 Magnum
Barrel Channel Options: Factory Barrel Contour & .920" Straight Channel(Right & Left Hand)

Russian: Mosin Nagant M91, M30, M44, M38

Sako: Finnfire, L46 Clip, L57 Old, L461 Vixen, L579 Forester, L61 Finnbear, L491, M591, M691,  A-I, A-II, A-III, A-IV, A-V, SAKO 75 #1, 75 #2, 75 #3, 75 #4, 75 #5 , Model 995(with blind magazine box)

Savage: 10, 10ML (Muzzloader), 11, 12, 13, 16, 110 Long & Short, 111, 112, 113, 116 (Right & Left Hand Versions)

Savage:  340

Savage Model 93  93FVSS-XP, 93FVSS, 93R17-BVSS, 93R17-FVSS, 93R17-FV, 93R17-GV, 93R17-GLV & (All Other Models In Series 93)
Please Note:  This model is currently available only with the varmint barrel contour.  Customers replacing their factory synthetic stock will need a metal trigger guard & screws available from Savage Arms for several dollars.
Savage Arms Parts Department:    (413)-568-7001..........Trigger Guard Part #100161, Screws Part #70048

 

Springfield: US 1903, US 1903 A3, US 22 Cal (approximate 8 week production time on these models) 

Tikka: Model 695-(White Tail Hunter), Model 595 (White Tail Hunter)

Weatherby: Vanguard Long, Vanguard Short, Mark V, FN, Varmintmaster, Others

Winchester: Model 70 Long/Short/Super Short (Right & Left Hand), Model 70 & 670/770 Blind Magazine Long/Short/Super Short (Right & Left Hand), Model 70 Classic (New Pre-'64 Type) Long & Short (Right & Left Hand) Barrel Channel Options: Featherweight Barrel, Standard Factory Barrel, Heavy Varmint Barrel. 

Winchester: Model 70 Pre-War, Model 70 Pre-1964, M43, M52C, M52D, M54,

 ALL of our gunstocks are UNFINISHED, completely shaped and ready for sanding & finishing.
They come with either a 99% "Press-Fit" Inlet which means that the action will bolt to the stock with little to no handwork involved, or a  96% "Semi" Inlet which will require some wood removal and handwork to fit the action and barrel.